.

Nature: Natural inorganic minerals and oxides.

Active Content: 100%

Physical Form: Free flowing fine powder.

Stability: Stable in viscous aqueous or non-aqueous systems

Storage: No expiry date is associated with the powder. Keep dry.

Compatibility: Compatible with anionic, nonionic and cationic products.

Properties:

v Kemiapearl P imparts a shiny pearl luster to cosmetic powders, creams, lotions, shampoos, detergents and many other products.

v Greatly increases hair or skin shine and brilliance.

v More Cost effective than pearlizing pastes since it does not contain water.

v Based on Naturally occurring minerals. Does not contain harmful chemicals.

v Very effective at low dosage.

v Reduces cost of storage, shipping and inventories.

v Can be mixed with a variety of powder fillers to produce cosmetic powders.

v Can be used in oil based products and W/O or O/W emulsions.

Dosage:

Kemiapearl P is typically added at a dose of 0.02-0.1%

Liquid Products: Add the required amount of Kemiapearl P to the batch at any stage but preferably to initial batch water. Heating is not necessary. Pre-mixed paste can also be prepared at concentration of 2% however, suitable thickeners and preservatives must be used.

Powder Products: Mix at low speed in an appropriate powder blender. Avoid high speed since it can break the particles and reduce gloss. Mixing time depends on amount and type of filler used.

Packing:

20 kg poly bag in carton box

Safety:

Avoid dust. Kemiapearl P does not pause any safety hazard. It has been tested dermatologically.

Remarks:

The information submitted in this publication is given in good faith but without warranty, In view of the many factors that may affect the application, users are recommended to carry out their own trials to determine the suitability of the product for their practical requirements. We cannot accept responsibility for any damage or loss resulting from the use of this information. Specifications are subject to change without notice.